- Giro Xen Helmet Replacement Pad Set – 108112
Giro Xen Helmet Replacement Pad Set – 108112
Category: Bike Helmets and Accessories
- Make sure this fits by entering your model number.
- Remote only compatible with COROS OMNI Smart Cycling Helmet
- Not compatible with COROS LINX Smart Cycling Helmet
This fits your .
For Use With The COROS OMNI Smart Cycling Helmet.
Package Contains:
1 – One Smart Remote
2 – One Smart Remote cradle
3 – One Smart Remote mounting tray
4 – Two large rubber mounting rings
5 – Two small rubber mounting rings
- Lightweight Aerocore In-Mold Construction
- VaporFit Adjustable Fit System
- Ultra-Light Single Layer Webbing
- AirEvac Ventilation
Getting you from any point to your destination, the Route road helmet raises the bar when it comes to comfort and protection out on the road. Using Smith’s proven Aerocore Construction featuring Koroyd, the Route’s clean design targets in on important zonal impact areas, offering better protection where and when it matters most. We combine this with our AirEvac ventilation and VaporFit adjustable fit system, creating the perfect balance of comfort and confidence for any ride.
- Make sure this fits by entering your model number.
- High Impact Resistance – Basecamp bike helmets with CPSC Certified use High-density, durable and tough PVC & PC, EPS foam, high protection and comfortable for mountains and roads.
- Ventilation for Comfortable – Bicycle helmets with 21 vents help to keep the cyclist cool and increase the speed. The liner/velcro can unpick to wash and it is safety, comfortable and breathable.
- LED Light for safety – Adult helmets with 2 lighting modes LED safety taillight- slow flashing and fast flashing, help people behind you clearly recognized your direction.
- Removable Visor – Safety helmet with removable visor provides shade when biking, you can enjoy cycling even in hot days, and you can take it off if you don’t want it.
- Adjustable System – Cycling helmet goes with a standard size, equipped with the easy-use dial system(rolling regulator) and side straps make this adult helmet adjustable to different head size 57-62CM (22.44-24.41”).
This fits your .
- Incredibly aerodynamic and top performing shell, tested in the wind-tunnel and able to provide a really impressive CX rate. Any position the head will assume the outflow of the air will be perfectly in line with the helmet.
- Chin pad with eco-leather chinstrap The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin.
- The tridimensional 3D DRY padding utilizes a multi-layer open cell construction process: high technology for the best comfort and performance.
- Removable and washable inner padding in Coolmax material
- The innovative magnetic visor is patented by KASK and integrated to the helmet thanks to a five magnets’ system. The total adherence of the visor to the helmet allows a continuous air flow and a great aerodynamic.
Everyone has seen Bambino Pro on the heads of the Team Sky riders. Several ventilation holes – and a 5 mm thick padding material that dissipates moisture very fast – keep you cool and comfortable, even during TT race , triathlon and track cycling performance. With its innovative shape and an easily removable magnetic visor, Bambino Pro looks as great as it performs.
- Make sure this fits by entering your model number.
- Easily Installs on Most Visorless Helmets
- Full Face Sun Protection
- Protects against Bugs, Wind and Rain
- Pivots Up and Down
- Detaches and Reattaches
This fits your .
The first bike helmet-mounted visor that shades your entire face: blocks 98% of UVA & 99.9% of UVB rays, detaches and can be easily installed on most visorless helmets. Helmet mounts are included. Our visor provides full peripheral vision and good airflow while protecting you from the elements. The mounts are 2 inches long and 1 inch wide. To determine if they will fit your helmet, please measure the width of your vents. HELMET NOT INCLUDED
- 24 air vents
- Light-weight Double In-Mold helmet
- Internal side air channel and heat sealed pads
- Detox ratchet fit belt adjustment system
- Detachable visor included
- PROTECT YOUR NOGGIN: Being safe is a no-brainer! Protect your noggin with the Street Helmet. It’s filled with protective EPS foam designed to disperse energy on impact and certified for biking and skating.
- FITS YOUR HEAD: The Street Helmet has a dial fit system that you can adjust and remove as needed. It comes with three sets of foam pads to change out for a more customized fit.
- SNAP IN AND GO: Snap in and out of your helmet in a flash, even with gloves. The Fidlock magnetic closure is easy to open and close and it’s covered in soft padding that’s comfortable on your chin.
- LIGHT AND BREEZY: The lightweight, in-mold shell has 11 vents and internal channeling for maximum airflow to keep you cool as a cucumber, all day long.
- SUITS YOUR SOUL: Brighten your daily commute or evening ride with these fun patterns and colors. The Street Helmet comes with a detachable visor and 360 degree reflectivity for a flashy look and extra safety.
The beautifully designed Nutcase Gen 3 Helmet now features new sizing, improved ventilation, lighter weight, better reflectivity, detachable visor and removable spin dial. It has exterior crumble zones, an injection-molded ABS shell, fully padded interior and EPS foam liner. 11 strategically placed vents cool the entire head (2 front intake vents, 7 top-mounted exhaust vents, 2 back exhaust vents). Air channels in EPS also enhance ventilation while the optional visor protects your vision from sun and weather. Fidlock magnetic buckle gives easy, single-handed adjustment. The spin dial system offers a precision fit and 360 reflective details keep you visible in low light. Comes in 3 sizes so you can find the perfect fit. Small fits head sizes 201/2″ – 22″ (52cm – 56cm), Medium fits head sizes 22″ – 231/2″ (56cm – 60cm) and Large fits head sizes 231/2″ – 25″ (60cm – 64cm). Certified CPSC for Bicycle Riding and ASTM F1492 for Skating.
- The Noodle Helmet is now available in 2 adjustable sizes. Small (18.5″ – 20.5”) and Medium (20.5” – 22”). Please use a string and tape measure to carefully measure your child’s head size.
- 14 air vents with integrated bug mesh in the front vents,Helmet Dimensions: 6.5″ H x 8.5″ W x 9.5″ D
- Extended visor for maximum protection, nylon straps, pinch guard chin strap
- Adjustable fit dial. Head Size: 18.5 – 20.5 inches (47-52 cm)
- Meets CPSC standards
Color:Red | Size:Small
We feel that it’s never too early to set a good example, especially when it comes to safety. At Joovy, we believe teaching children early about safety and creating good safety habits is an essential part of parenting. That’s exactly why we developed the Noodle helmet. The Noodle Helmet is now available in 2 adjustable sizes. Small (18.5″ – 20.5”) and Medium (20.5” – 22”). Please use a string and tape measure to carefully measure your child’s head size. We recommend using it when children ride bikes, trikes, ride-on cars, scooters, bike trailers and other activities like these. The Joovy Noodle features 14 air vents, integrated bug mesh in the front vents, extended visor for maximum protection, nylon straps, pinch guard chin strap, and an adjustable fit dial. It is a great looking helmet and comes in various colors. Meets CPSC Standards.